Allgemeine Informationen |
Marke |
Specialized |
Modell |
Stumpjumper Pro |
Modellreihe |
SJ |
Jahr |
2022 |
Radtyp |
MTB Fully |
Einsatzbereich |
Feld-/Waldwege, Gelände |
Einsatzzweck |
Tour, Sport |
Rahmenform |
Unisex |
Geschlecht |
Damen, Herren |
Rahmengröße |
S2 |
Rahmenfarbe (Filter) |
blau |
Rahmenfarbe (Hersteller) |
GLOSS OASIS / BLACK |
Ausstattung |
Rahmen |
FACT 11m carbon chassis and rear-end, asymmetrical design, 29 Trail Geometry, SWAT Door integration, flip chip Head Tube/Bottom Bracket adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 130mm of travel |
Gabel |
FOX FLOAT 34 Factory, GRIP2 damper, Kashima Coating, 15x110mm, 44mm offset, 140mm of travel |
Dämpfer |
FOX FLOAT DPS Factory, Rx Trail Tune, EVOL Air sleeve, Kashima Coat, 3-position adjustment w/ Open Mode Adjustment, 190x45mm |
Schaltungsart |
Kettenschaltung |
Lenker |
Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 780mm, 35.0mm |
Griffe |
Deity, Knuckleduster, Black |
Bremsen |
Hydraulische Scheibenbremse |
Bremse (vorne) |
SRAM G2 RSC, 4-piston caliper, hydraulic disc, 200mm |
Bremse (hinten) |
SRAM G2 RSC, 4-piston caliper, hydraulic disc, 180mm |
Felge (vorne) |
Roval Traverse Carbon 29, hookless carbon, 30mm inner width, hand-built, 2Bliss Ready |
Felge (hinten) |
Roval Traverse Carbon 29, hookless carbon, 30mm inner width, hand-built, 2Bliss Ready |
Nabe (vorne) |
DT Swiss 350, sealed cartridge bearings, 15x110mm spacing, 28h |
Schläuche |
Standard, Presta valve |
Speichen |
DT Competition Race |
Kurbelgarnitur |
SRAM X1 Carbon, DUB, S1:165mm, S2-S5: 170mm, S6: 175mm |
Innenlager |
SRAM DUB, BSA 73mm, threaded |
Kette / Riemen |
SRAX X01 Eagle, 12-speed |
Sattel |
Bridge, 155/143mm, Hollow Ti-rails |
Sattelstütze |
Bike Yoke, Revive Max, 34.9 (S1:120mm, S2/S3:150mm, S4-S6: 185mm) |
Ritzel / Kassette / Riemensche |
SRAM XG-1295 Eagle, 10-52t |